Solvent-free, water-resistant vinyl adhesive for floating floors in per-finishes wood or rigid, melamine and laminated amino-plastic.
Consumption: 10m2
Set to light foot traffic: After approx. 12 hours
Complete hardening: Approx 24 hours
You may also like...
-
V4 Wood Flooring: Alpine EP103 Golden Oak Brushed & Colour Oiled Rustic Oak (18/5 x 125mm)
Area covered per pack: 2.2m2
A thick top layer of subtly textured rustic European oak is soaked in a Golden brown hue created with penetrating coats of UV hardened natural colour oils. The 5mm rustic oak top layer is rolled with steel brushes to take away the softer grain whilst following the contours of the natural grain, the result is an enhanced surface texture which becomes tactile underfoot and extremely durable to everyday scratches. The brushed surface is further enhanced and protected by UV cured coats of Danish Colour oil.
Price on Application -
Wood’s Good TimberMax Ultra DPM underlay
Wood’s Good TimberMax Ultra DPM underlay
A high-density foam underlay with vapour barrier and self adhesive edge for use with Engineered Wood and Laminate Flooring.
High Density EVA Foam gives high performance and acoustic properties underfoot.
Built-in Vapour Barrier to protect against moisture from sub-floor (overlap strip & tape).
Underfloor Heating: Suitable
Tog Rating: 0.72
Sound Reduction: 23db
Specification:
Size: 1m x 10m (10m2 coverage)
Thickness: 3mm
Price on Application -
TimberMax UFH VapourStop underlay
TimberMax UFH VapourStop
For use with underfloor heating. Includes a Damp Proof Membrane.
Quality polyethylene foam of high density. Excellent noise reduction and impact sound insulation as well as long term load-bearing capacity.
Underfloor Heating: Excellent
Tog Rating: 0.303
Sound Reduction: 19db
Wood Flooring. Moisture Protection. Excellent for use with Underfloor Heating.
Specification: Size: 1m x 10m (10m2 coverage)
Thickness: 2mm
Price on Application -
Scotia Veneer
Scotia or beading helps to hide the expansion gap between newly installed flooring and existing skirting. Available in a selection of colours matched to all the V4 Wood Flooring product ranges.
A colour match to your flooring will automatically be provided.
Specification: H: 17mm x W: 17mm length: 2.5m
Price on Application -
Hardwood Stair Nosing (Flush Fit) 18mm x 2000mm (Option D)
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed for a flush fit interlock with the tongue on the floor board (Tongue & Groove) leaving a smooth transition from flooring to nosing.
(Option D) – Available Unfinished or with a Lacquered Finish.
Appropriate nosing will automatically be provided to match chosen unfinished or Lacquered floor.
Price on Application -
Hardwood Ramp Profile 2000mm
Ramp profile is used for connecting your hardwood floor with lower surfaces (e.g. carpet, laminate or tile where the height difference between the two floors is greater than that met by using a Semi Ramp profile).
Available in a selection of colours matched to all the V4 Wood Flooring product ranges.
A colour and height match to your flooring will automatically be provided.
2 Heights available: 15mm or 18mm
Price on Application -
Hardwood Twin / T-Bar Profile 1000mm
Twin or T-Bar profile joins the hardwood floor with other floor coverings of the same height.
Available in a selection of colours matched to all the V4 Wood Flooring product ranges.
A colour and height match to your flooring will automatically be provided.
2 Heights available: 15mm or 18mm
Price on Application -
Hardwood Pipe Covers – Oak Lacquered
Pre-finished hardwood pipe covers are ideal for use with engineered and solid wood flooring. Provides a natural solid wood finish around areas where pipes are required to run through floors.
Pipe Covers are Dowel Fit – Centre 17mm
Pipe Covers are available in pairs only.
Price on Application -
Hardwood Semi Ramp Profile 1000mm
Semi Ramp profile is used for connecting your hardwood floor with lower surfaces (e.g. carpet, laminate or tile). Available in a selection of colours matched to all the V4 Wood Flooring product ranges.
A colour and height match to your flooring will automatically be provided.
2 Heights available: 15mm or 18mm
Price on Application -
Hardwood Stair Nosing (Flush Fit) 14mm x 2000mm (Option B)
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed for a flush fit interlock with the tongue on the floor board (Tongue & Groove) leaving a smooth transition from flooring to nosing.
(Option B) – Available Unfinished or with a Lacquered Finish.
Appropriate nosing will automatically be provided to match chosen unfinished or Lacquered floor.
Price on Application -
V4 Wood Flooring: Alpine VIT107 Vale Oak Oiled Rustic Oak (14/3 x 190mm)
Area covered per pack: 2.508m2
Classic wide oak planks with bevelled edges are full of rustic charm and finished to a high specification using UV cured natural oil. Oak trees are grown in managed forests and selected for their maturity, but no two trees are the same – so the random lengths of this plank allow us to use the whole tree during production. This means we don’t waste any of the precious timber, a saving that also allows V4 Approved retailers to offer a great value option for a great looking engineered oak floor.
Price on Application -
Hardwood Square Edge / End Profile 1000mm
For a perfect finish Square Edge / End profiles are an ideal solution for edging around fixed objects such as fire hearths, french / patio / bi-fold door frames and are commonly used to edge around coir matting installed at entrances.
Available in a selection of colours matched to all the V4 Wood Flooring product ranges.
A colour and height match to your flooring will automatically be provided.
2 Heights available: 15mm or 18mm
Price on Application
