Call Us Today! 0191 241 2581|enquiries@flooringdirect2U.com
  • Free Sample – V4 Wood Flooring : Tundra TH109 Seashell Oak Strip Herringbone (11/4 x 70mm)

    Area covered per pack: 2.06m2

    Tundra Herringbone is milled with or without a bevel edge and creates precision geometry across large or small spaces with a hard wearing oiled surface making it the ideal choice for commercial and residential spaces.

    SKU: FD2U-V4-TH109-free-sample Category: Tag:
    Free!
  • Hardwood Pipe Covers – Oak Lacquered

    Pre-finished hardwood pipe covers are ideal for use with engineered and solid wood flooring. Provides a natural solid wood finish around areas where pipes are required to run through floors.

    Pipe Covers are Dowel Fit – Centre 17mm

    Pipe Covers are available in pairs only.

    SKU: FD2U-SA-Hardwood-Pipe-Covers-Oak-Lacquered Category: Tag:
    Price on Application
  • Hardwood Pipe Covers – Unfinished

    Pre-finished hardwood pipe covers are ideal for use with engineered and solid wood flooring. Provides a natural solid wood finish around areas where pipes are required to run through floors.

    Pipe Covers are Dowel Fit – Centre 17mm

    Pipe Covers are available in pairs only.

    SKU: FD2U-SA-Hardwood-Pipe-Covers-Oak-unfinished Category: Tag:
    Price on Application
  • Hardwood Ramp Profile 1000mm

    Ramp profile is used for connecting your hardwood floor with lower surfaces (e.g. carpet, laminate or tile where the height difference between the two floors is greater than that met by using a Semi Ramp profile).

    Available in a selection of colours matched to all the V4 Wood Flooring product ranges.

    A colour and height match to your flooring will automatically be provided.

    2 Heights available:   15mm  or  18mm

    SKU: FD2U-SA-hardwood-ramp-profile-1000mm Category: Tag:
    Price on Application
  • Hardwood Ramp Profile 2000mm

    Ramp profile is used for connecting your hardwood floor with lower surfaces (e.g. carpet, laminate or tile where the height difference between the two floors is greater than that met by using a Semi Ramp profile).

    Available in a selection of colours matched to all the V4 Wood Flooring product ranges.

    A colour and height match to your flooring will automatically be provided.

    2 Heights available:   15mm  or  18mm

    SKU: FD2U-SA-hardwood-ramp-profile-2000mm Category: Tag:
    Price on Application
  • Hardwood Semi Ramp Profile 1000mm

    Semi Ramp profile is used for connecting your hardwood floor with lower surfaces (e.g. carpet, laminate or tile).  Available in a selection of colours matched to all the V4 Wood Flooring product ranges.

    A colour and height match to your flooring will automatically be provided.

    2 Heights available:   15mm  or  18mm

    SKU: FD2U-SA-hardwood-semi-ramp-profile-1000mm Category: Tag:
    Price on Application
  • Hardwood Semi Ramp Profile 2000m

    Semi Ramp profile is used for connecting your hardwood floor with lower surfaces (e.g. carpet, laminate or tile). Available in a selection of colours matched to all the V4 Wood Flooring product ranges.

    A colour and height match to your flooring will automatically be provided.

    2 Heights available:   15mm  or  18mm

    SKU: FD2U-SA-hardwood-semi-ramp-profile-2000m Category: Tag:
    Price on Application
  • Hardwood Square Edge / End Profile 1000mm

    For a perfect finish Square Edge / End profiles are an ideal solution for edging around fixed objects such as fire hearths, french / patio / bi-fold door frames and are commonly used to edge around coir matting installed at entrances.

    Available in a selection of colours matched to all the V4 Wood Flooring product ranges.

    A colour and height match to your flooring will automatically be provided.

    2 Heights available:   15mm  or  18mm

    SKU: FD2U-SA-hardwood-square-edge-end-profile-1000mm Category: Tag:
    Price on Application
  • Hardwood Square Edge / End Profile 2000mm

    For a perfect finish Square Edge / End profiles are an ideal solution for edging around fixed objects such as fire hearths, french / patio / bi-fold door frames and are commonly used to edge around coir matting installed at entrances.

    Available in a selection of colours matched to all the V4 Wood Flooring product ranges.

    A colour and height match to your flooring will automatically be provided.

    2 Heights available:   15mm  or  18mm

    SKU: FD2U-SA-hardwood-square-edge-end-profile-2000mm Category: Tag:
    Price on Application
  • Hardwood Stair Nosing (Flush Fit) 14mm x 1000mm (Option A)

    Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.

    Provides a natural solid wood finish on stair cases.

    Designed for a flush fit interlock with the tongue on the floor board (Tongue & Groove) leaving a smooth transition from flooring to nosing.                               

    (Option A) – Available Unfinished or with a Lacquered Finish.

    Appropriate nosing will automatically be provided to match chosen unfinished or lacquered floor.

    SKU: FD2U-SA-hardwood-stair-nosing-flush-fit-14mm-x-1000mm-option-a Category: Tag:
    Price on Application
  • Hardwood Stair Nosing (Flush Fit) 14mm x 2000mm (Option B)

    Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.

    Provides a natural solid wood finish on stair cases.

    Designed for a flush fit interlock with the tongue on the floor board (Tongue & Groove) leaving a smooth transition from flooring to nosing.                               

    (Option B) – Available Unfinished or with a Lacquered Finish.

    Appropriate nosing will automatically be provided to match chosen unfinished or Lacquered floor.

    SKU: FD2U-SA-hardwood-stair-nosing-flush-fit-14mm-x-2000mm-option-b Category: Tag:
    Price on Application
  • Hardwood Stair Nosing (Flush Fit) 18mm x 1000mm (Option C)

    Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.

    Provides a natural solid wood finish on stair cases.

    Designed for a flush fit interlock with the tongue on the floor board (Tongue & Groove) leaving a smooth transition from flooring to nosing.                               

    (Option C) – Available Unfinished or with a Lacquered Finish.

    Appropriate nosing will automatically be provided to match chosen unfinished or lacquered floor.

    SKU: FD2U-SA-Hardwood-Stair-Nosing-Flush-Fit-18mm-x-1000mm-Option-C Category: Tag:
    Price on Application
  • Hardwood Stair Nosing (Flush Fit) 18mm x 2000mm (Option D)

    Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.

    Provides a natural solid wood finish on stair cases.

    Designed for a flush fit interlock with the tongue on the floor board (Tongue & Groove) leaving a smooth transition from flooring to nosing.                               

    (Option D) – Available Unfinished or with a Lacquered Finish.

    Appropriate nosing will automatically be provided to match chosen unfinished or Lacquered floor.

    SKU: FD2U-SA-Hardwood-Stair-Nosing-Flush-Fit-18mm-x-2000mm-Option-D Category: Tag:
    Price on Application
  • Hardwood Stair Nosing (Lipover) 14mm x 1000mm (Option I)

    Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.

    Provides a natural solid wood finish on stair cases.

    Designed to lip over the edge of flooring to allow expansion.                           

    (Option I) – Available Unfinished or with a Lacquered Finish.

    Appropriate nosing will automatically be provided to match chosen unfinished or lacquered floor.

    SKU: FD2U-SA-Hardwood-Stair-Nosing-Lipover-14mm-x-1000mm-Option-I Category: Tag:
    Price on Application
  • Hardwood Stair Nosing (Lipover) 14mm x 1000mm (Option K)

    Hardwood Walnut stair nosing profiles are ideal for use with engineered walnut flooring.

    Provides a natural solid wood finish on stair cases.

    Designed to lip over the edge of flooring to allow expansion.                           

    (Option K) – Walnut

    For use with walnut flooring.

    SKU: FD2U-SA-hardwood-stair-nosing-lipover-14mm-x-1000mm-option-k Category: Tag:
    Price on Application
  • Hardwood Stair Nosing (Lipover) 14mm x 2000mm (Option J)

    Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.

    Provides a natural solid wood finish on stair cases.

    Designed to lip over the edge of flooring to allow expansion.                           

    (Option J) – Available Unfinished or with a Lacquered Finish.

    Appropriate nosing will automatically be provided to match chosen unfinished or lacquered floor.

    SKU: FD2U-SA-hardwood-stair-nosing-lipover-14mm-x-2000mm-option-j Category: Tag:
    Price on Application

Title

Go to Top