Solvent-free, water-resistant vinyl adhesive for floating floors in per-finishes wood or rigid, melamine and laminated amino-plastic.
Consumption: 10m2
Set to light foot traffic: After approx. 12 hours
Complete hardening: Approx 24 hours
You may also like...
-
V4 Wood Flooring: Deco Plank A111 Oak Rustic Brushed & Matt Lacquered (14/3 x 190mm)
Area covered per pack: 2.888m2
A series of 6 steel brushes are applied to remove the soft grain from the top layer the rustic hardwood surface whilst sympathetically following the natural contours of the wide section of oak. The wear layer is then spray coated with coats of durable matt lacquer. The resulting plank is both wonderfully tactile and ultimately hardwearing, the rich, textured surface deflecting everyday wear and scratches. Also available in matching Herringbone.
Price on Application -
V4 Wood Flooring: Alpine VIT107 Vale Oak Oiled Rustic Oak (14/3 x 190mm)
Area covered per pack: 2.508m2
Classic wide oak planks with bevelled edges are full of rustic charm and finished to a high specification using UV cured natural oil. Oak trees are grown in managed forests and selected for their maturity, but no two trees are the same – so the random lengths of this plank allow us to use the whole tree during production. This means we don’t waste any of the precious timber, a saving that also allows V4 Approved retailers to offer a great value option for a great looking engineered oak floor.
Price on Application -
Hardwood Twin / T-Bar Profile 2000mm
Twin or T-Bar profile joins the hardwood floor with other floor coverings of the same height.
Available in a selection of colours matched to all the V4 Wood Flooring product ranges.
A colour and height match to your flooring will automatically be provided.
2 Heights available: 15mm or 18mm
Price on Application -
Hardwood Twin / T-Bar Profile 1000mm
Twin or T-Bar profile joins the hardwood floor with other floor coverings of the same height.
Available in a selection of colours matched to all the V4 Wood Flooring product ranges.
A colour and height match to your flooring will automatically be provided.
2 Heights available: 15mm or 18mm
Price on Application -
Hardwood Pipe Covers – Oak Lacquered
Pre-finished hardwood pipe covers are ideal for use with engineered and solid wood flooring. Provides a natural solid wood finish around areas where pipes are required to run through floors.
Pipe Covers are Dowel Fit – Centre 17mm
Pipe Covers are available in pairs only.
Price on Application -
V4 Wood Flooring: Deco Plank A112 Oak Rustic Oiled (14/3 x 190mm)
Area covered per pack: 2.888m2
Minimalism is key with this charming board, the rustic oak surface is simply smooth sanded, buffed and sealed with 4 coats of UV cured natural Danish oil. The resulting surface has a rich lustre and subtle natural sheen, which is hardwearing, stain resistant and easy to care for, whilst preserving the tactile warm hardwood appeal. Micro bevels give a contemporary edge to this modern classic. Also available in matching Herringbone.
Price on Application -
V4 Wood Flooring: Deco Plank UN102 Wharf Grey Brushed & Colour Oiled (15/4 x 190mm)
Area covered per pack: 2.166m2
Rich textured surfaces inspired by cityscapes reclaimed by nature. The surface of this board is rolled with steel brushes which emphasise the natural grain of the oak surface. The Wharf Grey top layer is given a deep lustre with the application of several colour oils which are UV cured to build up a natural protective surface.
Price on Application -
Hardwood Semi Ramp Profile 1000mm
Semi Ramp profile is used for connecting your hardwood floor with lower surfaces (e.g. carpet, laminate or tile). Available in a selection of colours matched to all the V4 Wood Flooring product ranges.
A colour and height match to your flooring will automatically be provided.
2 Heights available: 15mm or 18mm
Price on Application -
Hardwood Stair Nosing (Flush Fit) 18mm x 1000mm (Option C)
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed for a flush fit interlock with the tongue on the floor board (Tongue & Groove) leaving a smooth transition from flooring to nosing.
(Option C) – Available Unfinished or with a Lacquered Finish.
Appropriate nosing will automatically be provided to match chosen unfinished or lacquered floor.
Price on Application -
V4 Wood Flooring: Alpine E125 Sunlit Oak Satin Lacquered Rustic Oak (18/5 x 125mm)
Area covered per pack: 2.2m2
Rich coats of durable clear lacquer varnish create a soft satin sheen that makes this charming rustic oak plank shine. It’s thick European oak top layer is backed with durable hardwood multi-ply giving the finished floor the look and feel of a traditional solid wood installation.
Price on Application -
Hardwood Ramp Profile 1000mm
Ramp profile is used for connecting your hardwood floor with lower surfaces (e.g. carpet, laminate or tile where the height difference between the two floors is greater than that met by using a Semi Ramp profile).
Available in a selection of colours matched to all the V4 Wood Flooring product ranges.
A colour and height match to your flooring will automatically be provided.
2 Heights available: 15mm or 18mm
Price on Application -
V4 Wood Flooring : Deco Parquet Herringbone ZB108 Natural Oak Oiled Rustic Oak (14/3 x 90mm)
Area covered per pack: 1.44m2
ZB108 Natural Oak is smooth planed and simply finished with coats of grain enriching natural oil. Unlike traditional parquet blocks, the Deco Parquet range of floors are engineered with a thick oak top layer with bevelled edges bonded to a hardwood ply base, which means they can be bonded to any flat surface including over low energy underfloor heating systems. Their unique sizing means they can be installed in many different patterns.
Also available in a matching plank, Deco Plank A112.
Price on Application
