Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed to lip over the edge of flooring to allow expansion.
(Option O) – Walnut
For use with walnut flooring.
You may also like...
-
V4 Wood Flooring : Deco Parquet Herringbone ZB108 Natural Oak Oiled Rustic Oak (14/3 x 90mm)
Area covered per pack: 1.44m2
ZB108 Natural Oak is smooth planed and simply finished with coats of grain enriching natural oil. Unlike traditional parquet blocks, the Deco Parquet range of floors are engineered with a thick oak top layer with bevelled edges bonded to a hardwood ply base, which means they can be bonded to any flat surface including over low energy underfloor heating systems. Their unique sizing means they can be installed in many different patterns.
Also available in a matching plank, Deco Plank A112.
Price on Application -
V4 Wood Flooring: Alpine A110 Glade Oak Matt Lacquered Rustic Oak (14/3 x 190mm)
Area covered per pack: 2.166m2
The wider face of this rustic oak plank shows off the full grain of the tree and is smooth sanded and sealed with 6 coats of UV cured natural lacquer which protects the surface leaving it maintenance free but with the appearance of an oiled floor. Micro bevelled edges add clean lines to the rustic character filled oak board making it perfect for both traditional and modern interior design.
Price on Application -
Hardwood Stair Nosing (Flush Fit) 14mm x 2000mm (Option B)
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed for a flush fit interlock with the tongue on the floor board (Tongue & Groove) leaving a smooth transition from flooring to nosing.
(Option B) – Available Unfinished or with a Lacquered Finish.
Appropriate nosing will automatically be provided to match chosen unfinished or Lacquered floor.
Price on Application -
Hardwood Pipe Covers – Oak Lacquered
Pre-finished hardwood pipe covers are ideal for use with engineered and solid wood flooring. Provides a natural solid wood finish around areas where pipes are required to run through floors.
Pipe Covers are Dowel Fit – Centre 17mm
Pipe Covers are available in pairs only.
Price on Application -
Wood’s Good TimberMax Ultra DPM underlay
Wood’s Good TimberMax Ultra DPM underlay
A high-density foam underlay with vapour barrier and self adhesive edge for use with Engineered Wood and Laminate Flooring.
High Density EVA Foam gives high performance and acoustic properties underfoot.
Built-in Vapour Barrier to protect against moisture from sub-floor (overlap strip & tape).
Underfloor Heating: Suitable
Tog Rating: 0.72
Sound Reduction: 23db
Specification:
Size: 1m x 10m (10m2 coverage)
Thickness: 3mm
Price on Application -
Hardwood Stair Nosing (Flush Fit) 14mm x 1000mm (Option A)
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed for a flush fit interlock with the tongue on the floor board (Tongue & Groove) leaving a smooth transition from flooring to nosing.
(Option A) – Available Unfinished or with a Lacquered Finish.
Appropriate nosing will automatically be provided to match chosen unfinished or lacquered floor.
Price on Application -
Hardwood Semi Ramp Profile 2000m
Semi Ramp profile is used for connecting your hardwood floor with lower surfaces (e.g. carpet, laminate or tile). Available in a selection of colours matched to all the V4 Wood Flooring product ranges.
A colour and height match to your flooring will automatically be provided.
2 Heights available: 15mm or 18mm
Price on Application -
TimberMax UFH VapourStop underlay
TimberMax UFH VapourStop
For use with underfloor heating. Includes a Damp Proof Membrane.
Quality polyethylene foam of high density. Excellent noise reduction and impact sound insulation as well as long term load-bearing capacity.
Underfloor Heating: Excellent
Tog Rating: 0.303
Sound Reduction: 19db
Wood Flooring. Moisture Protection. Excellent for use with Underfloor Heating.
Specification: Size: 1m x 10m (10m2 coverage)
Thickness: 2mm
Price on Application -
Hardwood Semi Ramp Profile 1000mm
Semi Ramp profile is used for connecting your hardwood floor with lower surfaces (e.g. carpet, laminate or tile). Available in a selection of colours matched to all the V4 Wood Flooring product ranges.
A colour and height match to your flooring will automatically be provided.
2 Heights available: 15mm or 18mm
Price on Application -
Hardwood Square Edge / End Profile 2000mm
For a perfect finish Square Edge / End profiles are an ideal solution for edging around fixed objects such as fire hearths, french / patio / bi-fold door frames and are commonly used to edge around coir matting installed at entrances.
Available in a selection of colours matched to all the V4 Wood Flooring product ranges.
A colour and height match to your flooring will automatically be provided.
2 Heights available: 15mm or 18mm
Price on Application -
Hardwood Pipe Covers – Unfinished
Pre-finished hardwood pipe covers are ideal for use with engineered and solid wood flooring. Provides a natural solid wood finish around areas where pipes are required to run through floors.
Pipe Covers are Dowel Fit – Centre 17mm
Pipe Covers are available in pairs only.
Price on Application -
V4 Wood Flooring: Alpine VIT107 Vale Oak Oiled Rustic Oak (14/3 x 190mm)
Area covered per pack: 2.508m2
Classic wide oak planks with bevelled edges are full of rustic charm and finished to a high specification using UV cured natural oil. Oak trees are grown in managed forests and selected for their maturity, but no two trees are the same – so the random lengths of this plank allow us to use the whole tree during production. This means we don’t waste any of the precious timber, a saving that also allows V4 Approved retailers to offer a great value option for a great looking engineered oak floor.
Price on Application
