Solvent-free, water-resistant vinyl adhesive for floating floors in per-finishes wood or rigid, melamine and laminated amino-plastic.
Consumption: 10m2
Set to light foot traffic: After approx. 12 hours
Complete hardening: Approx 24 hours
You may also like...
-
V4 Wood Flooring: Deco Plank UN102 Wharf Grey Brushed & Colour Oiled (15/4 x 190mm)
Area covered per pack: 2.166m2
Rich textured surfaces inspired by cityscapes reclaimed by nature. The surface of this board is rolled with steel brushes which emphasise the natural grain of the oak surface. The Wharf Grey top layer is given a deep lustre with the application of several colour oils which are UV cured to build up a natural protective surface.
Price on Application -
Hardwood Semi Ramp Profile 1000mm
Semi Ramp profile is used for connecting your hardwood floor with lower surfaces (e.g. carpet, laminate or tile). Available in a selection of colours matched to all the V4 Wood Flooring product ranges.
A colour and height match to your flooring will automatically be provided.
2 Heights available: 15mm or 18mm
Price on Application -
V4 Wood Flooring : Deco DC101 Frozen Umber Brushed, Colour Stained & Hardwax Oiled (14/3 x 190mm)
Area covered per pack: 2.888m2
Deco Frozen Umber flooring beautifully crafted coloured floors created from an oak top layer which is lightly brushed to release the natural grain. Wood lye is then applied to bleach and colour the floors to create the deep lustred and distinctive oak tones and grain variations found in the collection.
Price on Application -
Hardwood Stair Nosing (Flush Fit) 18mm x 1000mm (Option C)
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed for a flush fit interlock with the tongue on the floor board (Tongue & Groove) leaving a smooth transition from flooring to nosing.
(Option C) – Available Unfinished or with a Lacquered Finish.
Appropriate nosing will automatically be provided to match chosen unfinished or lacquered floor.
Price on Application -
V4 Wood Flooring: Alpine E125 Sunlit Oak Satin Lacquered Rustic Oak (18/5 x 125mm)
Area covered per pack: 2.2m2
Rich coats of durable clear lacquer varnish create a soft satin sheen that makes this charming rustic oak plank shine. It’s thick European oak top layer is backed with durable hardwood multi-ply giving the finished floor the look and feel of a traditional solid wood installation.
Price on Application -
Hardwood Stair Nosing (Flush Fit) 14mm x 1000mm (Option A)
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed for a flush fit interlock with the tongue on the floor board (Tongue & Groove) leaving a smooth transition from flooring to nosing.
(Option A) – Available Unfinished or with a Lacquered Finish.
Appropriate nosing will automatically be provided to match chosen unfinished or lacquered floor.
Price on Application -
Hardwood Square Edge / End Profile 2000mm
For a perfect finish Square Edge / End profiles are an ideal solution for edging around fixed objects such as fire hearths, french / patio / bi-fold door frames and are commonly used to edge around coir matting installed at entrances.
Available in a selection of colours matched to all the V4 Wood Flooring product ranges.
A colour and height match to your flooring will automatically be provided.
2 Heights available: 15mm or 18mm
Price on Application -
Mapei Ultrabond Eco S948 1K Adhesive – 15Kg
One-component, solvent-free, silylated polymer-based adhesive with very low emission level of volatile organic compounds (VOC).
TECHNICAL DATA:
Consistency: creamy paste.
Colour: light beige.
Open time: 35 minutes.
Set to light foot traffic: approx. 12 hours.
Polishing: 3 days.
EMICODE: EC1 Plus – very low emission.
Storage: 12 months.
Application: MAPEI notched trowel for wood.
Consumption: 800-1200 g/m².
Packaging: 15 kgPrice on Application -
Hardwood Ramp Profile 1000mm
Ramp profile is used for connecting your hardwood floor with lower surfaces (e.g. carpet, laminate or tile where the height difference between the two floors is greater than that met by using a Semi Ramp profile).
Available in a selection of colours matched to all the V4 Wood Flooring product ranges.
A colour and height match to your flooring will automatically be provided.
2 Heights available: 15mm or 18mm
Price on Application -
TimberMax UFH VapourStop underlay
TimberMax UFH VapourStop
For use with underfloor heating. Includes a Damp Proof Membrane.
Quality polyethylene foam of high density. Excellent noise reduction and impact sound insulation as well as long term load-bearing capacity.
Underfloor Heating: Excellent
Tog Rating: 0.303
Sound Reduction: 19db
Wood Flooring. Moisture Protection. Excellent for use with Underfloor Heating.
Specification: Size: 1m x 10m (10m2 coverage)
Thickness: 2mm
Price on Application -
Hardwood Twin / T-Bar Profile 1000mm
Twin or T-Bar profile joins the hardwood floor with other floor coverings of the same height.
Available in a selection of colours matched to all the V4 Wood Flooring product ranges.
A colour and height match to your flooring will automatically be provided.
2 Heights available: 15mm or 18mm
Price on Application -
V4 Wood Flooring: Deco Plank A111 Oak Rustic Brushed & Matt Lacquered (14/3 x 190mm)
Area covered per pack: 2.888m2
A series of 6 steel brushes are applied to remove the soft grain from the top layer the rustic hardwood surface whilst sympathetically following the natural contours of the wide section of oak. The wear layer is then spray coated with coats of durable matt lacquer. The resulting plank is both wonderfully tactile and ultimately hardwearing, the rich, textured surface deflecting everyday wear and scratches. Also available in matching Herringbone.
Price on Application
