Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed to lip over the edge of flooring to allow expansion.
(Option P) – Walnut
For use with walnut flooring.
You may also like...
-
Scotia Veneer
Scotia or beading helps to hide the expansion gap between newly installed flooring and existing skirting. Available in a selection of colours matched to all the V4 Wood Flooring product ranges.
A colour match to your flooring will automatically be provided.
Specification: H: 17mm x W: 17mm length: 2.5m
Price on Application -
Mapei Ultrabond Eco S948 1K Adhesive – 15Kg
One-component, solvent-free, silylated polymer-based adhesive with very low emission level of volatile organic compounds (VOC).
TECHNICAL DATA:
Consistency: creamy paste.
Colour: light beige.
Open time: 35 minutes.
Set to light foot traffic: approx. 12 hours.
Polishing: 3 days.
EMICODE: EC1 Plus – very low emission.
Storage: 12 months.
Application: MAPEI notched trowel for wood.
Consumption: 800-1200 g/m².
Packaging: 15 kgPrice on Application -
V4 Wood Flooring : Deco DC101 Frozen Umber Brushed, Colour Stained & Hardwax Oiled (14/3 x 190mm)
Area covered per pack: 2.888m2
Deco Frozen Umber flooring beautifully crafted coloured floors created from an oak top layer which is lightly brushed to release the natural grain. Wood lye is then applied to bleach and colour the floors to create the deep lustred and distinctive oak tones and grain variations found in the collection.
Price on Application -
V4 Wood Flooring: Alpine EP101 Forest Oak Brushed & Oiled Rustic Oak (18/5 x 150mm)
Area covered per pack: 1.65m2
The 5 mm rustic oak top layer is rolled with steel brushes to take away the softer grain whilst following the contours of the natural grain, the result is an enhanced surface texture which becomes tactile underfoot and extremely durable to everyday scratches. This engineered wood floor from V4 Wood Flooring is packed full of rustic charm, adding warmth and character to both traditional and modern interiors alike.
Price on Application -
V4 Wood Flooring: Alpine A110 Glade Oak Matt Lacquered Rustic Oak (14/3 x 190mm)
Area covered per pack: 2.166m2
The wider face of this rustic oak plank shows off the full grain of the tree and is smooth sanded and sealed with 6 coats of UV cured natural lacquer which protects the surface leaving it maintenance free but with the appearance of an oiled floor. Micro bevelled edges add clean lines to the rustic character filled oak board making it perfect for both traditional and modern interior design.
Price on Application -
Hardwood Pipe Covers – Oak Lacquered
Pre-finished hardwood pipe covers are ideal for use with engineered and solid wood flooring. Provides a natural solid wood finish around areas where pipes are required to run through floors.
Pipe Covers are Dowel Fit – Centre 17mm
Pipe Covers are available in pairs only.
Price on Application -
Hardwood Ramp Profile 1000mm
Ramp profile is used for connecting your hardwood floor with lower surfaces (e.g. carpet, laminate or tile where the height difference between the two floors is greater than that met by using a Semi Ramp profile).
Available in a selection of colours matched to all the V4 Wood Flooring product ranges.
A colour and height match to your flooring will automatically be provided.
2 Heights available: 15mm or 18mm
Price on Application -
V4 Wood Flooring : Alpine A103 Brushed Oak Brushed & Matt Lacquered (14/3 x 150mm)
Area covered per pack: 1.71m2
Mirroring the proportions of a traditional floor board this plank suits a domestic interior whilst being versatile and easy to install. The rustic oak surface is lightly brushed to remove the soft grain, leaving a hard wearing and tactile hardwood surface. 6 coats of natural matt lacquer protect the surface whilst maintaining the natural oak tone. The resulting floor is easy to maintain and extremely resistant to everyday wear and scratching, ideal our modern lifestyles.
Price on Application -
V4 Wood Flooring : Deco Parquet Herringbone ZB107 Unfinished Rustic Oak (14/3 x 90mm)
Area covered per pack: 1.44m2
ZB107 Rustic Oak is filled and sanded smooth and left unfinished so that it can be installed and then coloured to suit any design or simply lacquered or oiled for a completely natural look.
IMPORTANT NOTE: This floor must be coated with a suitable oil of lacquer at the time of installation and before it is in use. This will affect the finished appearance
Price on Application -
V4 Wood Flooring: Deco DC105 Silver Haze, Colour Stained & Hardwax Oiled (14/3 x 190mm)
Area covered per pack: 2.888m2
Deco Silver Haze flooring beautifully crafted coloured floors created from an oak top layer which is lightly brushed to release the natural grain. Wood lye is then applied to bleach and colour the floors to create the deep lustred and distinctive oak tones and grain variations found in the collection.
Price on Application -
Hardwood Ramp Profile 2000mm
Ramp profile is used for connecting your hardwood floor with lower surfaces (e.g. carpet, laminate or tile where the height difference between the two floors is greater than that met by using a Semi Ramp profile).
Available in a selection of colours matched to all the V4 Wood Flooring product ranges.
A colour and height match to your flooring will automatically be provided.
2 Heights available: 15mm or 18mm
Price on Application -
Hardwood Pipe Covers – Unfinished
Pre-finished hardwood pipe covers are ideal for use with engineered and solid wood flooring. Provides a natural solid wood finish around areas where pipes are required to run through floors.
Pipe Covers are Dowel Fit – Centre 17mm
Pipe Covers are available in pairs only.
Price on Application
