£126.00 Per Pack | £43.60 / m2
Area covered per pack: 2.89m2
Arran Oak flooring is full of character and charm. The natural grain of the oak is enhanced by the UV Oil finish whilst filled knots and splits are visible.
Super Rustic grade is likely to contain all characteristics across all boards with any size of knot and level of colour variation in the timber to be expected. Expect to see some sapwood as well as checks and filler used in a colour to complement these natural variances in most boards.
| Manufacturer | |
|---|---|
| Product Code | |
| Flooring Type | |
| Flooring Thickness | |
| Wear layer | |
| Flooring Width | |
| Flooring Length | |
| Floor Style | |
| Species | |
| Colour | |
| Surface | |
| Flooring Finish | |
| Edge Detail | |
| Profile | |
| Installation | |
| Pack Size | |
| Suitable for Underfloor Heating | |
| Manufacturer Warranty |
Threshold mouldings are perfect joining gaps between two floors that are the same level, giving your floor a seamless finish.
Specification:
Thickness: 6mm
Width: 45mm
Length: 2700mm
Ramp profile is used for connecting your hardwood floor with lower surfaces (e.g. carpet, laminate or tile where the height difference between the two floors is greater than that met by using a Semi Ramp profile).
Specification:
Thickness: 20mm
Width: 63mm
Length: 900mm
End cap trims are to be used where the solid or engineered floor meets an external door.
It can also be used if the flooring runs up to a step or if the flooring needs to go up to a definitive point.
Specification:
Thickness: 19mm
Width: 40mm
Length: 2700mm
End cap trims are to be used where the solid or engineered floor meets an external door.
It can also be used if the flooring runs up to a step or if the flooring needs to go up to a definitive point.
Specification:
Thickness: 19mm
Width: 40mm
Length: 900mm
Especially designed for underfloor heating systems.
A high quality, high density non- crosslinked premium polyethylene.
Specification:
Size: 1m x 10m (10m2 coverage)
Thickness: 1.8mm
Scotia mouldings are used to cover the expansion gap without removing the existing skirting board.
Specification:
H: 18mm x W: 18mm
Length: 2.7m
Semi Ramp mouldings are great for bridging the gap between two areas of flooring which change slightly in height.
Specification:
Thickness: 18mm
Width: 59mm
Length: 2700mm
Polyfoam underlay can be used on any sub-floor that is level and dry such as floorboards and hardboards.
Specification:
Size: 1m x 15m (15m2 coverage)
Thickness: 3mm
Threshold mouldings are perfect joining gaps between two floors that are the same level, giving your floor a seamless finish.
Specification:
Thickness: 6mm
Width: 45mm
Length: 900mm
End cap trims are to be used where the solid or engineered floor meets an external door.
It can also be used if the flooring runs up to a step or if the flooring needs to go up to a definitive point.
Specification:
Thickness: 19mm
Width: 40mm
Length: 900mm
Stair nosing comes in especially handy when fitting staircases that need a curved edge and a slight over.
Stair nosing can be used to finish staircases that have been fitted with hardwood flooring.
Specification:
Thickness: 44mm
Width: 60mm
Length: 1000mm
Ramp profile is used for connecting your hardwood floor with lower surfaces (e.g. carpet, laminate or tile where the height difference between the two floors is greater than that met by using a Semi Ramp profile).
Specification:
Thickness: 20mm
Width: 63mm
Length: 2700mm
Semi Ramp mouldings are great for bridging the gap between two areas of flooring which change slightly in height.
Specification:
Thickness: 18mm
Width: 59mm
Length: 900mm
Ramp profile is used for connecting your hardwood floor with lower surfaces (e.g. carpet, laminate or tile where the height difference between the two floors is greater than that met by using a Semi Ramp profile).
Specification:
Thickness: 20mm
Width: 63mm
Length: 900mm
Woodtex is made from a dense rubber material, thick enough to soak up small sub-floor undulations and imperfections.
The density of the rubber will also significantly reduce the hollow sound that can occur when floating flooring and is suitable for use with underfloor heating.
Specification:
Size: 1m x 10m (10m2 coverage)
Thickness: 3mm
Stair nosing comes in especially handy when fitting staircases that need a curved edge and a slight over.
Stair nosing can be used to finish staircases that have been fitted with hardwood flooring.
Specification:
Thickness: 44mm
Width: 60mm
Length: 1000mm
Threshold mouldings are perfect joining gaps between two floors that are the same level, giving your floor a seamless finish.
Specification:
Thickness: 16mm
Width: 50mm
Length: 2700mm
Threshold mouldings are perfect joining gaps between two floors that are the same level, giving your floor a seamless finish.
Specification:
Thickness: 6mm
Width: 45mm
Length: 2700mm
Threshold mouldings are perfect joining gaps between two floors that are the same level, giving your floor a seamless finish.
Specification:
Thickness: 6mm
Width: 45mm
Length: 900mm
Threshold mouldings are perfect joining gaps between two floors that are the same level, giving your floor a seamless finish.
Specification:
Thickness: 16mm
Width: 50mm
Length: 900mm
Semi Ramp mouldings are great for bridging the gap between two areas of flooring which change slightly in height.
Specification:
Thickness: 18mm
Width: 59mm
Length: 2700mm
End cap trims are to be used where the solid or engineered floor meets an external door.
It can also be used if the flooring runs up to a step or if the flooring needs to go up to a definitive point.
Specification:
Thickness: 19mm
Width: 40mm
Length: 2700mm
Designed for engineered flooring and floating solid wood flooring and is resistant to heavy loads, uneven surfaces and acts as barrier from moisture.
Specification:
Size: 600mm x 856mm (9.76m2 coverage)
Thickness: 5mm
Stair nosing comes in especially handy when fitting staircases that need a curved edge and a slight over.
Stair nosing can be used to finish staircases that have been fitted with hardwood flooring.
Specification:
Thickness: 44mm
Width: 60mm
Length: 3000mm
Threshold mouldings are perfect joining gaps between two floors that are the same level, giving your floor a seamless finish.
Specification:
Thickness: 16mm
Width: 50mm
Length: 900mm
Threshold mouldings are perfect joining gaps between two floors that are the same level, giving your floor a seamless finish.
Specification:
Thickness: 16mm
Width: 50mm
Length: 2700mm
Scotia mouldings are used to cover the expansion gap without removing the existing skirting board.
Specification:
H: 18mm x W: 18mm
Length: 2.7m
Ramp profile is used for connecting your hardwood floor with lower surfaces (e.g. carpet, laminate or tile where the height difference between the two floors is greater than that met by using a Semi Ramp profile).
Specification:
Thickness: 20mm
Width: 63mm
Length: 2700mm
Polyfoam underlay can be used on any sub-floor that is level and dry such as floorboards and hardboards.
Specification:
Size: 1m x 15m (15m2 coverage)
Thickness: 2mm
Stair nosing comes in especially handy when fitting staircases that need a curved edge and a slight over.
Stair nosing can be used to finish staircases that have been fitted with hardwood flooring.
Specification:
Thickness: 44mm
Width: 60mm
Length: 3000mm
Polyfoam underlay can be used on any sub-floor that is level and dry such as floorboards and hardboards.
Specification:
Size: 1m x 15m (15m2 coverage)
Thickness: 5mm
Semi Ramp mouldings are great for bridging the gap between two areas of flooring which change slightly in height.
Specification:
Thickness: 18mm
Width: 59mm
Length: 900mm
