Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed to lip over the edge of flooring to allow expansion.
(Option P) – Walnut
For use with walnut flooring.
You may also like...
-
Hardwood Square Edge / End Profile 2000mm
For a perfect finish Square Edge / End profiles are an ideal solution for edging around fixed objects such as fire hearths, french / patio / bi-fold door frames and are commonly used to edge around coir matting installed at entrances.
Available in a selection of colours matched to all the V4 Wood Flooring product ranges.
A colour and height match to your flooring will automatically be provided.
2 Heights available: 15mm or 18mm
Price on Application -
V4 Wood Flooring: Deco Plank A111 Oak Rustic Brushed & Matt Lacquered (14/3 x 190mm)
Area covered per pack: 2.888m2
A series of 6 steel brushes are applied to remove the soft grain from the top layer the rustic hardwood surface whilst sympathetically following the natural contours of the wide section of oak. The wear layer is then spray coated with coats of durable matt lacquer. The resulting plank is both wonderfully tactile and ultimately hardwearing, the rich, textured surface deflecting everyday wear and scratches. Also available in matching Herringbone.
Price on Application -
Mapei Ultrabond Eco S948 1K Adhesive – 15Kg
One-component, solvent-free, silylated polymer-based adhesive with very low emission level of volatile organic compounds (VOC).
TECHNICAL DATA:
Consistency: creamy paste.
Colour: light beige.
Open time: 35 minutes.
Set to light foot traffic: approx. 12 hours.
Polishing: 3 days.
EMICODE: EC1 Plus – very low emission.
Storage: 12 months.
Application: MAPEI notched trowel for wood.
Consumption: 800-1200 g/m².
Packaging: 15 kgPrice on Application -
Hardwood Stair Nosing (Flush Fit) 18mm x 1000mm (Option C)
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed for a flush fit interlock with the tongue on the floor board (Tongue & Groove) leaving a smooth transition from flooring to nosing.
(Option C) – Available Unfinished or with a Lacquered Finish.
Appropriate nosing will automatically be provided to match chosen unfinished or lacquered floor.
Price on Application -
V4 Wood Flooring: Deco Plank A112 Oak Rustic Oiled (14/3 x 190mm)
Area covered per pack: 2.888m2
Minimalism is key with this charming board, the rustic oak surface is simply smooth sanded, buffed and sealed with 4 coats of UV cured natural Danish oil. The resulting surface has a rich lustre and subtle natural sheen, which is hardwearing, stain resistant and easy to care for, whilst preserving the tactile warm hardwood appeal. Micro bevels give a contemporary edge to this modern classic. Also available in matching Herringbone.
Price on Application -
Hardwood Ramp Profile 2000mm
Ramp profile is used for connecting your hardwood floor with lower surfaces (e.g. carpet, laminate or tile where the height difference between the two floors is greater than that met by using a Semi Ramp profile).
Available in a selection of colours matched to all the V4 Wood Flooring product ranges.
A colour and height match to your flooring will automatically be provided.
2 Heights available: 15mm or 18mm
Price on Application -
V4 Wood Flooring : Deco Parquet Herringbone ZB107 Unfinished Rustic Oak (14/3 x 90mm)
Area covered per pack: 1.44m2
ZB107 Rustic Oak is filled and sanded smooth and left unfinished so that it can be installed and then coloured to suit any design or simply lacquered or oiled for a completely natural look.
IMPORTANT NOTE: This floor must be coated with a suitable oil of lacquer at the time of installation and before it is in use. This will affect the finished appearance
Price on Application -
Hardwood Pipe Covers – Oak Lacquered
Pre-finished hardwood pipe covers are ideal for use with engineered and solid wood flooring. Provides a natural solid wood finish around areas where pipes are required to run through floors.
Pipe Covers are Dowel Fit – Centre 17mm
Pipe Covers are available in pairs only.
Price on Application -
Mapei Adhesive D3 PVA 0.5Kg
Solvent-free, water-resistant vinyl adhesive for floating floors in per-finishes wood or rigid, melamine and laminated amino-plastic.
Consumption: 10m2
Set to light foot traffic: After approx. 12 hours
Complete hardening: Approx 24 hours
Price on Application -
Hardwood Pipe Covers – Unfinished
Pre-finished hardwood pipe covers are ideal for use with engineered and solid wood flooring. Provides a natural solid wood finish around areas where pipes are required to run through floors.
Pipe Covers are Dowel Fit – Centre 17mm
Pipe Covers are available in pairs only.
Price on Application -
V4 Wood Flooring : Alpine A104 Upland Oak Rustic Brushed & Oiled (14/3 x 150mm)
Area covered per pack: 1.71m2
This micro bevelled plank is classically proportioned to suit any interior space, milled from rustic grade oak which is lightly brushed to remove the soft grain from the top layer of the wood. This leaves a surface which is hard and more resistant to scratches. Coats of Danish oil are machine applied and and buffed into the textured surface, each coat is cured under a low voltage UV light. The result is a natural oiled stain resistant surface which allows the floor breathe and is simple to maintain.
Price on Application -
Hardwood Stair Nosing (Flush Fit) 14mm x 2000mm (Option B)
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed for a flush fit interlock with the tongue on the floor board (Tongue & Groove) leaving a smooth transition from flooring to nosing.
(Option B) – Available Unfinished or with a Lacquered Finish.
Appropriate nosing will automatically be provided to match chosen unfinished or Lacquered floor.
Price on Application
