Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed to lip over the edge of flooring to allow expansion.
(Option L) – Walnut
For use with walnut flooring.
You may also like...
-
Hardwood Square Edge / End Profile 1000mm
For a perfect finish Square Edge / End profiles are an ideal solution for edging around fixed objects such as fire hearths, french / patio / bi-fold door frames and are commonly used to edge around coir matting installed at entrances.
Available in a selection of colours matched to all the V4 Wood Flooring product ranges.
A colour and height match to your flooring will automatically be provided.
2 Heights available: 15mm or 18mm
Price on Application -
Hardwood Pipe Covers – Unfinished
Pre-finished hardwood pipe covers are ideal for use with engineered and solid wood flooring. Provides a natural solid wood finish around areas where pipes are required to run through floors.
Pipe Covers are Dowel Fit – Centre 17mm
Pipe Covers are available in pairs only.
Price on Application -
Hardwood Stair Nosing (Flush Fit) 14mm x 2000mm (Option B)
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed for a flush fit interlock with the tongue on the floor board (Tongue & Groove) leaving a smooth transition from flooring to nosing.
(Option B) – Available Unfinished or with a Lacquered Finish.
Appropriate nosing will automatically be provided to match chosen unfinished or Lacquered floor.
Price on Application -
V4 Wood Flooring : Alpine A103 Brushed Oak Brushed & Matt Lacquered (14/3 x 150mm)
Area covered per pack: 1.71m2
Mirroring the proportions of a traditional floor board this plank suits a domestic interior whilst being versatile and easy to install. The rustic oak surface is lightly brushed to remove the soft grain, leaving a hard wearing and tactile hardwood surface. 6 coats of natural matt lacquer protect the surface whilst maintaining the natural oak tone. The resulting floor is easy to maintain and extremely resistant to everyday wear and scratching, ideal our modern lifestyles.
Price on Application -
Hardwood Ramp Profile 1000mm
Ramp profile is used for connecting your hardwood floor with lower surfaces (e.g. carpet, laminate or tile where the height difference between the two floors is greater than that met by using a Semi Ramp profile).
Available in a selection of colours matched to all the V4 Wood Flooring product ranges.
A colour and height match to your flooring will automatically be provided.
2 Heights available: 15mm or 18mm
Price on Application -
V4 Wood Flooring : Deco DC101 Frozen Umber Brushed, Colour Stained & Hardwax Oiled (14/3 x 190mm)
Area covered per pack: 2.888m2
Deco Frozen Umber flooring beautifully crafted coloured floors created from an oak top layer which is lightly brushed to release the natural grain. Wood lye is then applied to bleach and colour the floors to create the deep lustred and distinctive oak tones and grain variations found in the collection.
Price on Application -
Wood’s Good TimberMax Ultra DPM underlay
Wood’s Good TimberMax Ultra DPM underlay
A high-density foam underlay with vapour barrier and self adhesive edge for use with Engineered Wood and Laminate Flooring.
High Density EVA Foam gives high performance and acoustic properties underfoot.
Built-in Vapour Barrier to protect against moisture from sub-floor (overlap strip & tape).
Underfloor Heating: Suitable
Tog Rating: 0.72
Sound Reduction: 23db
Specification:
Size: 1m x 10m (10m2 coverage)
Thickness: 3mm
Price on Application -
Hardwood Stair Nosing (Flush Fit) 14mm x 1000mm (Option A)
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed for a flush fit interlock with the tongue on the floor board (Tongue & Groove) leaving a smooth transition from flooring to nosing.
(Option A) – Available Unfinished or with a Lacquered Finish.
Appropriate nosing will automatically be provided to match chosen unfinished or lacquered floor.
Price on Application -
V4 Wood Flooring: Deco DC105 Silver Haze, Colour Stained & Hardwax Oiled (14/3 x 190mm)
Area covered per pack: 2.888m2
Deco Silver Haze flooring beautifully crafted coloured floors created from an oak top layer which is lightly brushed to release the natural grain. Wood lye is then applied to bleach and colour the floors to create the deep lustred and distinctive oak tones and grain variations found in the collection.
Price on Application -
Hardwood Stair Nosing (Flush Fit) 18mm x 1000mm (Option C)
Hardwood Oak stair nosing profiles are ideal for use with engineered flooring.
Provides a natural solid wood finish on stair cases.
Designed for a flush fit interlock with the tongue on the floor board (Tongue & Groove) leaving a smooth transition from flooring to nosing.
(Option C) – Available Unfinished or with a Lacquered Finish.
Appropriate nosing will automatically be provided to match chosen unfinished or lacquered floor.
Price on Application -
V4 Wood Flooring : Deco Parquet Herringbone ZB107 Unfinished Rustic Oak (14/3 x 90mm)
Area covered per pack: 1.44m2
ZB107 Rustic Oak is filled and sanded smooth and left unfinished so that it can be installed and then coloured to suit any design or simply lacquered or oiled for a completely natural look.
IMPORTANT NOTE: This floor must be coated with a suitable oil of lacquer at the time of installation and before it is in use. This will affect the finished appearance
Price on Application -
TimberMax UFH VapourStop underlay
TimberMax UFH VapourStop
For use with underfloor heating. Includes a Damp Proof Membrane.
Quality polyethylene foam of high density. Excellent noise reduction and impact sound insulation as well as long term load-bearing capacity.
Underfloor Heating: Excellent
Tog Rating: 0.303
Sound Reduction: 19db
Wood Flooring. Moisture Protection. Excellent for use with Underfloor Heating.
Specification: Size: 1m x 10m (10m2 coverage)
Thickness: 2mm
Price on Application
